The arc furnace shop No. 3 of Zlatoust Electrometallurgical Works has produced the corrosion- and heat-resistant steel EP-410-Sh according to technique, developed by the company specialists. The steel was produced using the electroslag remelting. The slabs with the sizes of 150x500x1200 mm and 210x500x1400 mm were produced to be further processed at the sheet-rolling mills.…
In July Zlatoust Electrometallurgical Works produced 5508 tons of liquid steel. The vacuum arc remelting site overfulfilled its target by 5%. The main products were stainless nickel-containing alloys and corrosion-resistant steel without nickel. The rolling shop produced 2824 tons of metal. In particular, the mill-400 produced 998 tons and bar mill-280 – 226 tons. (Ukrainian…
Zlatoust Electrometallurgical Works is carrying out a campaign to expand grade and size portfolio. Each month manufacture of a new type of product is mastered. In July the company started producing corrosion-resistant alloy on the basis of nickel. According to the tests, the quality of the slabs corresponds to all the technical conditions and GOST…
In January-June Zlatoust Electrometallurgical Works mastered the manufacture of several new alloys and rolled metal types. In particular, in February ZEMZ started manufacturing a new heat-resistant alloy on the iron-nickel basis. In the same month the company mastered the manufacture of slabs with the size of 140×450 mm of an exceptionally hard alloy on the…
Zlatoust Electrometallurgical Works has mastered the technique to produce round rods of heat-resistant chromium-nickel-manganese steel of EP750-SH grade. The rods have the diameter of 85-160 mm. It should be noted that the first batch of EP750-SH steel rods was produced back in December 2017. (Ukrainian metal)
In April Zlatoust Electrometallurgical Works produced 5722 tons of liquid steel. All the electric steel shop sites have demonstrated increase in output. The rolling sector produced 4717 tons of blooms, up by 95 tons from the target, with stainless nickel-containing steel slab accounting for almost 800 tons. The slabs have been sent to Krasniy Octyabr…
Zlatoust Electrometallurgical Works has finished assembly of railroad to transport the floor-type loading machine at the thermal annealing furnaces site being constructed in the rolling shop No. 3. The foundation for the rails with the length of 48 meters each has been completed. At present the floor-type loading machine is being assembled. Bosio annealing furnaces…
The rolling shop No. 1 of the Zlatoust Electrometallurgical Works has mastered the manufacture of stainless chrome-nickel alloy EI-878 slabs. The slabs with the size of 150×500 mm were produced at the 1150-mill of the ingot with the diameter of 630 mm. Previously the works manufactured only forgings of this alloy. The metal has successfully…
